Ground Fault Relay DGF5-2

1 / 6
Ground Fault Relay DGF5 front
2 / 6
Ground Fault Relay DGF5 bottom
3 / 6
Ground Fault Relay DGF5 back
4 / 6
Ground Fault Relay DGF5 Discription
5 / 6
Ground Fault Relay DGF5 typical field connection using internal sensor
6 / 6
Ground Fault Relay DGF5 dimentions

price:€

In stock:

If your needs exceed our stock, please contact us. Due to our excellent component stock-levels, we are able to accomodate most requests.

Contact GFS for price and delivery.

This unit has been known as the D64RPY2 brand labelled for Eaton Corp. As of November 2023 we decided to sell this unit on this website as the DGF5-2.

The DGF5-2 is a microprocessor based ground fault unit for use on solidly grounded or resistance grounded systems. This digital electronic unit measures ground fault current using a built-in 28 mm zero sequence Current Sensor (CS).

The system will react to alternating current (AC) only and will reject direct current (DC) signals. Accuracy will be maintained over a frequency range of 45 - 450 Hz, making it suitable for variable frequency drive applications. The DGF5-2 is a Class A device as defined in the IEC 60755 standard; it is therefore fully characterized for operation with sinusoidal AC and pulsating DC currents. The maximum system operating voltage for the DGF5-2 is 660 V.

The DGF5-2 houses a non-isolated universal power supply of 24 – 48 V AC or DC and is equipped with form ‘C’ (3-wire), changeover contacts. The relay operating mode is Pulsed Trip/Auto Reset. The Ground Fault Current Trip level is factory set at 500 mA, the Trip Delay Time is factory set at 500 ms. By pressing the remote ‘TEST’ button, a functional test of the DGF5-2 is invoked, three seconds later the unit resets.

Seven coloured wires simplifies connection of field wiring. To ensure that the DGF5-2 will function in severe circumstances, it is encapsulated in polyurethane (PUR) to make sure it is not vulnerable to mechanical shock, vibration nor weather.

The DGF5-2 is a microprocessor based ground fault unit for use on solidly grounded or resistance grounded systems. This digital electronic unit measures ground fault current using a built-in 28 mm zero sequence Current Sensor (CS).
The system will react to alternating current (AC) only and will reject direct current (DC) signals. Accuracy will be maintained over a frequency range of 45 - 450 Hz, making it suitable for variable frequency drive applications. The DGF5-2 is a Class A device as defined in the IEC 60755 standard; it is therefore fully characterized for operation with sinusoidal AC and pulsating DC currents. The maximum system operating voltage for the DGF5-2 is 660 V. The DGF5-2 houses a non-isolated universal power supply of 24 – 48 V AC or DC and is equipped with form ‘C’ (3-wire), changeover contacts. The relay operating mode is Pulsed Trip/Auto Reset. The Ground Fault Current Trip level is factory set at 500 mA, the Trip Delay Time is factory set at 500 ms. By pressing the remote ‘TEST’ button, a functional test of the DGF5-2 is invoked, three seconds later the unit resets. Seven coloured wires simplifies connection of field wiring. To ensure that the DGF5-2 will function in severe circumstances, it is encapsulated in polyurethane (PUR) to make sure it is not vulnerable to mechanical shock, vibration nor weather.

Copyright: Ground Fault Systems BV
Enschede

The Netherlands 2023

KvK: 55400914

Social Media